In this manual, the following abbreviations are used. Use the HP La serJet S can software to scan the doc ument into a fol der in.TIFF for mat or any other. Includes an ADF that allows faster, more effi cient scan jobs with multiple-page documents. Information on how to contact HP is located here.LaserJet M2727nf on the Scan documents.

If the error stays with the original printer, then the printer needs to be service. If the error follows with the cartridge, then replacing the cartridge should solve the problem.

Another option instead of replacing cartridge is if you have two P2055 printers and one doesn't have the memory error, swap the cartridges between them. If the new cartridge also has the same issue, then I would recommend you contact HP Support to determine if the printer may need to be repaired.

If the problem is not solved, replace the cartridge.

This will help ensure that the controller within the printer is at a known state. Usually it is a small board with 2 metal contacts somewhere on the side that is installed first in the engine. One of the things you are looking for is to ensure that the memory on the supply is present and not damaged. Also look inside the printer and validate there doesn't appear to be any damage. I will add that you should remove the print cartridge and check it over to ensure it has no damage. This page at the above link lists the following recommended actions: This is a link to a web page that provides information on the HP LaserJet P2050 Series Printer Error codes and how to interpret them: (This may require a service call if they are not customer replaceable.)ġ0.1 is another memory error relating to the black print cartridge.

Replace the Pick-Roller and/or the Separation Pad.

Make sure the Pick Roller and the Separation Pad are clean and not damaged.

Paper that is too heavy may not be able to pick properly. Mis-picks on a full tray can happen, but may be more likely when the tray is almost empty.

Make sure there is enough media in the tray.

Check the tray to make sure it is pushing the media up when the tray is installed.

Recommended steps to resolve the 13.00 would be: This can be caused by damaged paper, a warn pick roller or other mechanical issue. What happens is the printer attempts to pick the paper but the paper doesn't get picked and so there is a jam. If the new print cartridge continues to have the same error, the printer will likely need service.įor the 13.00.00, since you mentioned that there is no jam to clear, that would be what we call a 'no media mis-pick'. It may also require a new print cartridge. This could be solved by removing and then reinstalling the print cartridge. The 10.4 is a memory error associated with the Print Cartridge.

Hp laserjet m2727 no paper pick up